KNX bus feedthrough coupler - DIN rail mount (ABI-DC1501S00)

Excl. VAT: €24.98 Incl. VAT: €30.23
OR

Quick Overview

The device provides a convenient means to bring the two-wires of a KNX or other home automation bus to the front of the panel. This greatly simplifies connection to the bus in case of configuration or testing with the ETS software, because one does not have to open the panel every time again.

KNX bus feedthrough coupler - DIN rail mount

Double click to view full picture and to return

Zoom Out
Zoom In

Details

Phoenix female to spring loaded feedthrough connector. The keystone latch mechanism maintains the connector coupler in the DIN-rail holder. Occupies 1 standard width on the DIN-rail.
The device provides a convenient means to bring the two-wires of a KNX or other home automation bus to the front of the panel. This greatly simplifies connection to the bus in case of configuration or testing with the ETS software, because one does not have to open the panel every time again.
On a multi-flat building, this economic device can save a few thousand Euros because there is no need to installa dedicated KNX to USB converter for each panel.
The Phoenix slide-in front connector is compatible with several KNX USB interface test couplers (e.g. Weinzierl 330, K-BUS BNUS-00/00.1, WireGate USB TPUART 0097, Busware TUL TPUART USB light, etc.)
Alternatively use the ABI-DC3022S00 double wire red-blackfeedthrough terminal.

Additional Information

AVAILABILITY: Product in stock
Gross Weight (kg/unit) 0.0200
Characteristics: No
Standards compliance: No
Dimensions: WxHxD (mm): 17,8x80x65
Packaging: Individually packaged
Datasheet No
Manual No
Application notes No
Software No
Keywords No