TV-over-Twisted-Pair RF amplifier - MASTER - 4 ports (ABI-EV2008S00)

Excl. VAT: €299.00 Incl. VAT: €361.79
OR

Quick Overview

The amplifier’s coax input accepts broadband FM and TV signals in the range between 88 and 862MHz and sends back return path signals in a band between 5MHz and 65MHz for use on Docsis compliant CableTV networks
The amplified FM/VHF/UHF signal is offered on four RJ45 connectors that can be connected via the twisted pair cabling to RJ45 wall outlets.
Two coax outputs allow an extension with two slave output modules ABI-EV2014S00 in order to bring the maximum number of TV sets connected to the amplifier to 12.

TV-over-Twisted-Pair  RF amplifier - MASTER - 4 ports  (ABI-EV2008S00)

Double click to view full picture and to return

Zoom Out
Zoom In
  • TV-over-Twisted-Pair  RF amplifier

Details

This wideband RF coax-to-twisted pair TV amplifier is the entry-point for the home of
- aerial-based television channels (FM, analog VHF-UHF, DVB-T)
or
- coaxial network CableTV signals with or without in-band interactive return path

Input coax port:
The amplifier’s main input accepts broadband FM and TV signals in the range between 88 and 862MHz. The port also carries return path signals in the reverse direction in a band between 5MHz and 65MHz for use on Docsis compliant CableTV networks.

Output RJ45 ports:
The combination FM/VHF/UHF is offered on four RJ45 connectors that can be connected via OmniMedia cable to RJ45 wall outlets. These ports carry back in-band return path signals for interactive digital TV services.

To extend the unit, two piggyback coaxial output ports supply high-level broadband signals to feed slave twisted pair output modules (ABI-EV2014S00), thus increasing the scope of the base amplifier module from 4 ports to a total of 8 or 12 ports.

The amplifier has an automatic gain control circuit to adapt to the variations in input signal level coming from the aerial or CaTV network. Simple diagnostics is offered through a flashing LED which shows proper operation and input signal strength.

Required power supply: ABI-PS1001S14

Additional Information

AVAILABILITY: Product in stock
Gross Weight (kg/unit) 0.4200
Characteristics: - 1 F coax input (IEC61169-24) for aerial/cableTV
- 2 F coax outputs for slave twisted pair modules
- 4 RJ45 shielded TV ports (IEC60603-7)
- Direct interactive return path (Docsis)
- Max. Link length on OmniMedia HD1000 cable:
Full TV band: DVB-C >=35m, DVB-T >=80m
Single TV channel: DVB-C >=70m, DVB-T>=240m
- 9 DIN positions wide
Standards compliance: - Safety: EN60065
- EMI: EN50081-1 & EN50082-1
- Immunity test voltage contact discharge 4kV, air discharge 8kV
- RoHS compliance: 2002/95/EC
- WEEE compliance: 2002/96/EC
Dimensions: WxHxD (mm): 157x80x65
Packaging: Individually packaged
Datasheet datasheet ABI-EV20XXS00
Manual Quick start guide ABI-EV20XX
Application notes No
Software No
Keywords N/A